BEST PRACTICE ADVICE GUIDELINE PARAMETERS ONLY - Actual parameters may vary depending on operating conditions
- Follow guidelines to set the correct RPM speed. Incorrect RPM can lead to poor life or tool breakage.
- Apply firm, steady feed pressure throughout the cut, applying the feed very slowly and cautiously during the first 1mm of the cut
- Avoid lateral movement or tilting which can cause damage to the tool
- Ensure regular application of quality cooling lubricant, especially when drilling thick or hardened materials
- Hardened or heat-affected materials may require higher torque, reduced RPM and feed rates and extra coolant
- When drilling into box section ensure the tip of the tool is not contacting the far side of the box section at the same time it is drilling the outside wall. This may cause breakage to the tool
- Flame cut, laser cut or punched holes may not be possible to ream with Impact Wrench. In this situation ream with a slow speed Magnet Drill with an ImpactaMag or VersaDrive Reamer.
