Trend Universal Subbase Comes With Pins & Bush

• Trend Universal Sub Base C/w Pins & Bush UNIBASE
• The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. Will fit directly to most routers.
• Line-up pin used with a 16 mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base.
• Suits collet sizes 1/4inch, 8mm, 12 mm and 1/2inch.

Instructions for fitting:

• The line-up pin fit into the collet and is plunged through the router base.
• The line-up bush is fitted into the Unibase and secured.
• This is then placed over the line-up pin and rotated in order to line up the fixing holes.
• The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes.
• These range from 10 mm up to 30 mm (GB10 - GB32).
• For larger diameter cutters a 40 mm guide bush (GB40) is available.