Victron Energy – Phoenix Inverter Smart 12/3000 230V – PIN122300000
- The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA and 2000VA for 12, 24 or 48V systems.
- It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
- Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
- Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.
- Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.
Models:
Bluetooth built-in: fully configurable with a tablet or smartphone
- Low battery voltage alarm
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage: 210 – 245V
- Frequency: 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
- Alarm relay
Monitoring:
- In- and output voltage, load and alarms
VE.Direct communication port
- The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
Proven reliability
- The full bridge plus toroidal transformer topology has proven its reliability over many years.
- The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
- Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
- When in ECO mode, the inverter will switch to standby when the load decreases below a preset
- value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable).
- If the load exceeds the preset level, the inverter will remain on.
Remote on/off
- A remote on/off switch or relay contact can be connected to a two pole connector.
- Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
LED diagnosis
- To transfer the load to another AC source: the automatic transfer switch
- For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
.webp)
