BIG H Industrial Multi Fuel Oil Garage Heater 30Kw / 102,000 BTU 230V

• 3-stage power regulation - 8kW, 19kW, 30kW.
• Heater overheating protection.
• Protection against overflow of the furnace.
• Simple and failure-free controller.
• Fuel tank covered with a powder coating.
• The combustion chamber is made of steel with increased temperature resistance.
• 25 l tank.
• Manual ignition.
• Warm air exhaust to the sides.
• Maximum temperature of hot air outlet 50-70 degrees C (at air temperature inside the room about 12 degrees C).
• Blowing in 1460 m3 / h of warm air.
• A high-precision, low-speed gear fuel pump, specially designed for our devices, taking into account the specific conditions of use, pumps any type of oil, regardless of its density.
• Thanks to this, you do not have to check the density of the oil at your disposal and you do not have to remember to select the appropriate operating mode - the pump installed in our devices pumps both thick used oils and thinner heating oils and their mixtures.

Features:

Combustion chamber

• The combustion chamber is made of stainless steel, while the fire bowl is made of cast iron, not of rapidly cooling steel.

Fuel filler

• The fuel filler is designed in such a way as to easily and quickly add fuel, without fear that we will flood the controller or larger contaminants will get into the tank.
• The easy-to-remove filter allows you to clean it quickly and efficiently.

Overflow protection

• New, improved system to prevent oil overflow in the combustion chamber, thanks to a more sensitive micro-switch.

Automation

• Improved device electronics. Now you do not have to wonder what voltage you have in the network, because in our latest controller we have used a voltage stabilization system. Over-voltage protection increases the service life of the controller.
• The universal oil stove controller is equipped with an adjustment knob and an On / Off button.

High thermal efficiency

• The heater effectively heats rooms up to 800m³ (with good insulation of the building).

Type of fuels that can be used

• Vegetable oils (biofuels),
• Raw vegetable oils (rapeseed, sunflower and others), including post-frying (gastronomy),
• Mineral oils (used engine, gear, hydraulic and diesel oils of HBO I, II, III type with a viscosity not higher than SAE80),
• Heating oil.