LED diodes signaling operation or possible emergency stop of combustion,
Built-in control thermostat (the fan turns off in the shutdown function of the stove when the temperature drops below 40 ° C within the combustion chamber),
Thermostatic pump operation supervision,
Durable housing covered with a powder coating,
Combustion chamber made of stainless steel,
90 l tank,
Manual ignition,
Tubular heat exchanger,
Completely pure heat,
Hot air outlet temperature 70-90 degrees C (at air temperature inside the room about 12 degrees C),
Blowing 5500 m3 / h of warm air.
Power control consists in smoothly increasing or decreasing the revolutions of the fuel feeding pump. Burning takes place evenly, regardless of the thickness of the oil.
A high-precision, low-speed gear fuel pump, specially designed for our devices, taking into account the specific conditions of use, pumps any type of oil, regardless of its density.
Thanks to this, you do not have to check the density of the oil at your disposal and you do not have to remember to select the appropriate operating mode - the pump installed in our devices pumps both thick used oils and thinner heating oils and their mixtures.
The fuel filler is designed in such a way as to easily and quickly add fuel, without fear that we will flood the controller or larger contaminants will get into the tank. The easy-to-remove filter allows you to clean it quickly and efficiently.
New, improved system to prevent oil overflow in the combustion chamber, thanks to a more sensitive micro-switch.
Improved device electronics. Now you do not have to wonder what voltage you have in the network, because in our latest controller we have used a voltage stabilization system. Over-voltage protection increases the service life of the controller.
Features:
Combustion chamber
The combustion chamber is made of stainless steel, while the fire bowl is made of cast iron, not of rapidly cooling steel.
Fuel filler
The fuel filler is designed in such a way as to easily and quickly add fuel, without fear that we will flood the controller or larger contaminants will get into the tank.
The easy-to-remove filter allows you to clean it quickly and efficiently.
Overflow protection
New, improved system to prevent oil overflow in the combustion chamber, thanks to a more sensitive micro-switch.
Automation
Improved device electronics. Now you do not have to wonder what voltage you have in the network, because in our latest controller we have used a voltage stabilization system. Over-voltage protection increases the service life of the controller.
The universal oil stove controller is equipped with an adjustment knob and an On / Off button.
High thermal efficiency
The heater effectively heats rooms up to 800m³ (with good insulation of the building).
Type of fuels that can be used
Vegetable oils (biofuels),
Raw vegetable oils (rapeseed, sunflower and others), including post-frying (gastronomy),
Mineral oils (used engine, gear, hydraulic and diesel oils of HBO I, II, III type with a viscosity not higher than SAE80),
.webp)
